It is working as SAP always works. An alternative is to use an export import pair. When you would have set the PID, export. When you would have read the PID, import. You may have to export to database instead of memory.
Neal
It is working as SAP always works. An alternative is to use an export import pair. When you would have set the PID, export. When you would have read the PID, import. You may have to export to database instead of memory.
Neal
Bom dia colegas.
Estou aplicando a nota 1877404, para o XML 3.10, e está me apresentando os seguintes erros:
Os passos manuais foram aplicados com êxito inclusive o arquivo EBSK184722.zip, e a nota 1803009 (Pré requisito da 1877404).
Algum de vocês já presenciou esse erro e consegue me ajudar a resolve-lo?
Obrigado.
Cássio Oliveira
In bi side run init with data transfer it is nothing but full load. Next time onword it will pick the delta records.but select lower interval 1 because Your loading data to dso .dso contains overwrite functionality.when you will select lower limit 1, it will start picking oneday before data .
Baiju,
My screen looks quite a bit different...
Some questions:
PeteA
Hey Stephen ,
Yes - you can add text to the header which you will see immediately in the preview but one cannot predefine a template ( on the fly )
Yes - the logo is being picked up from the default setting for logos.
Thank you
KARTHIK
Hi,
1) this should be posted in MM forum, not here
2) let the person go to MIGO , to menu Settings, click Default Values and check checkbox "Propose All Items"
3) I guess if it is STO it would need goods issue first happening in source plant so that GR can happen in receiving plant (so first create Outbound Delivery in source plant, post goods issue against it and then do the GR with 101 against this delivery or PO itself)
Regards,
Tomek
Hi experts,
We're attempting to set-up a SAML based authentication between our IDP and SAP portal. However, we're running into an issue where the SAML assertions are created under a load-balanced virtual name (virtual.domain.com) while the SAML configuration in the portal is only picking up the local server name (server.domain.com).
The mismatch of names is causing authentication to fail. We've also noticed that once SAML configuration is complete in the NWA, the Endpoint URL values are NOT adjustable.
So we're stuck at the moment to understand how to configure the portal to use the 'virual.domain.com' address in the SAML config to resolve the authentication errors?
Has anyone seen this before and how were you able to resolve?
Thank you!
Tim
Hi,
I get an error "Dereferencing of the NULL reference" during created_related_entity.
If you see on the picture below I think that I use right relation name for my zbooking_detail table.
method DO_INIT_CONTEXT.
CALL METHOD SUPER->DO_INIT_CONTEXT.
data : lr_leading_entity TYPE REF TO cl_crm_bol_entity,
lr_col TYPE REF TO if_bol_bo_col.
lr_leading_entity->create_related_entity(
iv_relation_name = 'ZAET_CA_ATAB000000' ).
lr_leading_entity->SET_PROPERTY_AS_STRING(
iv_attr_name = 'ZZVISITDATE' "#EC NOTEXT
iv_value = '01.01.2014'
).
lr_col->ADD(
exporting
iv_entity = lr_leading_entity
IV_SET_FOCUS = ABAP_TRUE
).
me->TYPED_CONTEXT->ZBOOKING_DETAIL->SET_COLLECTION( lr_col ).
endmethod.
Many Thanks & Regards,
Dmitry
Ok Guys
Sorry for my ignorance.But i think that i don't udesrtand correctly .sorry.
1-you go to ME28 and do your process (click)
2-this process pass by exit .
3-I dont understand the ALV in this case.
Can you send images of screens with process ?
I think maybe you could use assign but i need know more about it.
thanks and sorry again.
Hello, gurus!
Today a caught new problem.
I try to call referenced sub-process from another BPM-process. I have enabled principal propagation in both processes. After that I call head process by predefined user (in example "TestUser"), but unfortunately internal referenced sub-process was called by "SAP_BPM_Service" user.
Does anyone knows if I have any way to call referenced sub-process by predefined "TestUser" too?
Thanks for your answers.
Regards, Sergey.
Hi
I have created an iView for My Travel and Expenses in my portal. It works fine in Dev, Test but not Production.
The iViews starts okay and displays the power list. But if I try to press one of the action buttons like Edit, Copy, Delete etc.. it starts loading for 30sek and I get error 500 Connection timed out.
The iView is of type Web Dynpro for ABAP. All other iViews works fine. I also tried other POWL iviews and they work as well.
If I try to launch the FITV_POWL_TRIPS application directlry in the browser it works perfectly.
No Java Script errors. The whole domain is put in Trusted Site.
I use HTTP to log into the portal. The backend system is created with HTTP as well.
System pass connection test.
Hello colleagues,
I'm quite often facing a problem, that it is very hard to find relevant SAP notes in regards of installing and smooth running of CCLM and UPL.
I usually approach in a such way:
1. Go to service.sap.com/notes
2. put as a search criteria CCLM or UPL (or both) and wait for results.
The thing, that I want is to find only proper SAP Notes for my system, meaning I don't need irrelevant notes, which I don't have to install.
Then I tried to extend search criteria by:
Application Area: SV-SMG-CCM
Restrictions by Software Component:
Software Component | Release from | Release to | From Support Package |
---|---|---|---|
ST | 710 | 710 | SAPKITL709 |
But I don't get expected results!
I don't see MANY notes, which I find for my system without filter.
Can you please recommend anything?
Thank you!
Hello Alfons,
Checking quickly in the Juniper page showed me that 7.2R6 is not listed.
https://www.juniper.net/support/downloads/?p=sa4500#sw
Actually, 8.0R1.0 from December 2013 is the oldest SP they list.
I would not be able to test as we do not have Juniper Security Hardware in-house.
Would you mind updating the Firmware of your Juniper SA/SSL 4500 to 8.0R6.0?
It is not for me to say this but for Juniper please consult your Juniper expert. I suspect that if your actual SP on Juniper is too old, it might be that Juniper already did something about this issue.
If the updated Juniper 8.0R6.0 still shows the same issue, please let us know.
Kind Regards,
Javier Puig
AGS Product Support
Hi Kartik.
Where can I find this HTML file on the server?
Is it real modify for automatically display the header?
Thank you.
Regards,
Denis
Hi Divyanshu,
As per your advice i created STORE2BUFFER.ECO and kept in the location but the moment SUM is comming to PREP_EXTENSION/TR_CMDIMPORT_PREPARE that file is getting disappearing, i tried two time but both time file got disappear .
you have asked for stage relevent logs?? can you please let me know which log file you are looking for?
Thanks
Tabrayz
Cant understand the language itself
But suggest if you can try to restore the settings. Right click - > user settings and restore to default.
From the second screenshot, under team window, can you reset the selection criteria to see if it works ?
Regards
Neha
Hi Jai,
What exact issue you are facing with BDC in VI02,
Try to execute the BDC program in debugging mode 'A' and check where exactly BDC program is failing.
check each and every key step while recorded while BDC recording and implement the logic.
Please find the below sample program created based your requirement as mentioned above.
perform bdc_dynpro using 'SAPMV54A' '0020'.
perform bdc_field using 'BDC_CURSOR'
'VFKK-FKNUM'.
perform bdc_field using 'BDC_OKCODE'
'=UEBP'.
perform bdc_field using 'VFKK-FKNUM'
record-FKNUM_001.
perform bdc_dynpro using 'SAPMV54A' '0030'.
perform bdc_field using 'BDC_CURSOR'
'VFKP-POSTX(01)'.
perform bdc_field using 'BDC_OKCODE'
'=PDET'.
perform bdc_dynpro using 'SAPMV54A' '0040'.
perform bdc_field using 'BDC_CURSOR'
'VFKP-POSTX'.
perform bdc_field using 'BDC_OKCODE'
'=PABR'.
perform bdc_field using 'VFKP-POSTX'
record-POSTX_002.
perform bdc_dynpro using 'SAPMV54A' '0040'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VFKP-POSTX'
record-POSTX_003.
perform bdc_field using 'BDC_CURSOR'
'VFKPD-SLFREI'.
perform bdc_field using 'VFKPD-SLFREI'
record-SLSTOR_004.
perform bdc_dynpro using 'SAPLV54R' '0010'.
perform bdc_field using 'BDC_CURSOR'
'RV54A-BUTTON2'.
perform bdc_field using 'BDC_OKCODE'
'=ENT1'.
perform bdc_field using 'RV54A-BUTTON1'
record-BUTTON1_005.
perform bdc_field using 'RV54A-BUTTON2'
record-BUTTON2_006.
perform bdc_transaction using 'VI02'.
Replace the static variables and implement the logic as per the requirement .
Regards,
Lokeswar Redddy byni
treeview provode checkbox with state picture. When click on the pic, it will change the state pic.
I want to have this on display, but only for display, not allow user click on it to switch state pic. It means checkbox is read-only.
How to do it?
Hello,
You cannot view your converted text message using message monitoring. So check with JMS team and see what content they have received?
Secondly, there is something wrong with your target structure which u have created in PI. Can you paste the same?
IMO, u should alter ur target structure little bit like this
<MT_EnvioSolped_P1_ERP>
<Record>
<Data>ABC</Data>
</Record>
</MT_EnvioSolped_P1_ERP>
and use below parameters under module config
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType SimpleXML2Plain
XML2Plain xml.endSeparator 'nl'
XML2Plain xml.fieldSeparator ;
Thanks
Amit Srivastava
is it documented anywhere ?